Brake Rotor, Bug/Ghia/Super Beetle/Type 3 '66-'79, Front, 5-Lug (Chevy/Ford - 5x4-3/4, 5x4-1/2)

So Cal Imports is proud to offer a wide variety of drums and rotors for most any use. Have a special wheel application for your VW but nobody makes a drum or rotor that you can bolt them up to?  Well, look again! So Cal Imports' drums and rotors are the solution to your woes. Our drums and rotors can be custome drilled and tapped or studded for your special wheel application. We stock drums and rotors drilled for standard 4-Lug VW, Porsche 5-Lug, Ford 5-Lug or Chevy 5-Lug patterns. Or buy them blank for your machinist to accommodate your needs or supply accurate lug pattern dimensions and we'll drill and tap or stud to your exact specifications.

These drums come pre-drilled for the popular (Chevy 5x4-3/4) and (Ford 5x4-1/2) patterns and will require press-in wheel studs.

Type 3 Notes: Later model cars had a centering ring on the rotor, our rotors do not have this centering ring, they will however still work for your application.

Stud Installation Note: These drums/rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in inproperly installed studs or damage to the drum/rotor.

If you wish to have press-in studs installed please order the following:
Press-In Wheel Stud Installation Part# SI4L, Sold ea. (One Install Charge Required per Drum/Rotor)
Chevy Press-in Wheel Studs Part# 610259, Sold ea. (5pcs Required per Drum/Rotor)
Ford Press-in Wheel Studs Part# 610258, Sold ea. (5pcs Required per Drum/Rotor)

Brake Rotor, Bug/Ghia/Super Beetle '66-'79, Front, 5-Lug (Chevy/Ford - 5x4-3/4, 5x4-1/2), Sold ea.