Better stopping power is something every VW can use. AC Industries has done all the research necessary to compile complete kits to make the disc brake conversion process as painless as possible. Dropped spindle lowers the car approx. 2-1/4" This kit will widen the front track approx. 1/4" per side. Spindle uses '68 and later tie rod ends, and bearings. Bearings and Seals not included.
Kit Includes: (2) Rotors, (2) Ball Joint Dropped Spindles, (2) Calipers w/Pads and (1) Caliper Mounting Hardware.
Stud Installation Note: These drums/rotors are drilled for the correct stud size but must still be reamed to the finish size to obtain the proper press fit. Skipping this step will result in inproperly installed studs or damage to the drum/rotor.
If you wish to have press-in studs installed please order the following:
Press-In Wheel Stud Installation Part# SI4L, Sold ea. (One Install Charge Required per Drum/Rotor)
Chevy Press-in Wheel Studs Part# 610259, Sold ea. (5pcs Required per Drum/Rotor)
Ford Press-in Wheel Studs Part# 610258, Sold ea. (5pcs Required per Drum/Rotor)
Bearing & Seal Kit - (1 ea Part# 498490L) 6/'68-'77
For more information, please visit this products
webpage.
Call Us: (562)633-4979 
Email Us: 
